기업맞춤형 기술지원, 정책뉴스, 지원사업소개, 유망기술 제공 등
다양한 기업지원 정보제공을 위해 노력하겠습니다.
| 보유기관 | 한국핵융합에너지연구원 |
|
|---|---|---|
| 보유지역 | 대전 | |
| 보유실험실 | 국가핵융합연구소 연구기반설비동 3층 306 | |
| 모델명 | ABB a02020 | |
| 장비용도 | - 석탄가스화 반응기에서 나오는 합성가스 조성 분석을 위한 가스 분석기로써 수소 0~100% 일산화탄소0~100% 이산화탄소0~100% 메탄0~50% 산소0~100% 농도를 Vol%로 측정이 가능한 분석기 | |
| 주요사양 | - 일산화탄소 이산화탄소 메탄 : Uras26 - The continuous NDIR industrial photometer can selectively measure concentrations of up to four sample components. The analyzer features gas-filled opto-pneumatic detectors. Detector filling corresponds to the gas being measured. This means that the detector provides optimum sensitivity and high selectivity compared with the other gas components in the sample. Smallest measuring ranges are possible with the thermostat version. - 수소 : Caldos27 - Smallest measuring ranges and fast measurements are characteristic of Caldos27 thanks to its silicon sensor. In addition the micro-structure of the sensor gives the Caldos27 a particularly short T90 response time. Measuring ranges can be selected freely. An exceptionally long-term stability of the end point permits Caldos27 the single-point calibration with only one gas. - 산소 : Magnos206 - The Magnos206 is based on the magneto-mechanical measuring principle. Thanks to the short T90 time the Magnos206 is also suitable for measuring rapid changes in the concentration of the sample gas. The ability to freely select measuring ranges and set suppressed ranges means that the analyzer can be easily adapted to specific measurement tasks. Even measurements for safety are no problem – monitoring the sample flow rate through the measuring chamber always ensures that the current oxygen concentration is being measured. Calibration of the zero-point is only required once a month using air or nitrogen. |
|
| 장비사용 지원신청 |
|
|
